The Warranties described below are given to the original purchaser only AND ARE SUBJECT TO THE PROCEDURES, LIMITATIONS, DISCLAIMERS AND EXCLUSIONS SET FORTH HEREIN. The Warranties cover only approved product applications as recommended by Burlington Hardwood Floors. This warranty only covers residential usage of the product. Burlington solid and engineered floors are manufactured in accordance with accepted industry standards, which permit a defect tolerance not to exceed 5%. The defects may be of a manufacturing or natural type. This 5% allowance is not valid under this warranty and it is owner's and installer's responsibility for all products installed. This warranty applies only to material in excess of 5% that is deemed to be defective. The conditions of this warranty shall only apply when proper installation procedures are followed. This warranty shall not apply to solid hardwood floors which are installed in a basement, directly on a concrete slab, nor on an OSB (pressed wood) floor, nor in a room equipped with an in-floor radiant heating system.  

Installer and Purchaser Responsibility

It is critical that all installations are done in compliance with the procedures outlined in Burlington installation and maintenance instructions. Failure to install in accordance with the instructions and to properly maintain will void all warranties. No warranty coverage is provided for flooring that contains obvious defects of any kind that were installed nonetheless. It is the installer's and purchaser's responsibility to set aside pieces with visible defects and not use them. Make sure that the flooring meets the purchaser's expectations prior to installation. Likewise, it is the installer's and purchaser's responsibility to check that the moisture content of the uninstalled flooring is within the acceptable range that Burlington warrants of 6% to 9% prior to installation. The installer and purchaser are also responsible for ensuring that the subfloor has acceptable moisture content and that the relative humidity conditions at the site are suitable (35% to 55% relative humidity) prior to installation. It is the installer's and purchaser's responsibility to inspect the flooring prior to installation and to install the floor in a random and harmonious mix, and with good workmanship. The Burlington warranty does not apply to claims made on pieces of flooring installed with color/grain variation and this warranty does not cover poor workmanship by the installer. Once the flooring has been installed, the installer and purchaser have deemed the flooring acceptable and Burlington assumes no further responsibility for defects visible at the time of installation or moisture/humidity problems.

Lifetime Residential Structural Integrity Warranty:

Burlington warrants that these hardwood and engineered floors in their original manufactured condition, to be free from defects in material and workmanship including milling, assembly, dimension and grading for as long as the original purchaser owns the floor. Engineered floors are warranted against delamination (separation between plies) when installed in normal environmental conditions of relative humidity between 35% to 55%, and provided the flooring is not soaked in water either from above or below. A rich variety of natural wood characteristics such as knots, mineral highlights, pin holes, distinctive differences in color, and grain configuration provides the truest wood grain texture and detail that nature has to offer. These natural appearances are not construed as defects. Being a natural material, hardwood floors will react to humidity and temperature variations. In high humidity, wood picks up moisture and swells; in low humidity wood releases moisture and shrinks. At some periods of the year splits may temporarily appear between the boards. This phenomenon is normal and it is not covered by the warranty. Burlington hardwood floors must be installed in environments of 35%-55% relative humidity for coverage under the warranty and to prevent possible damage, such as excessive swelling and/or shrinkage or other movement, due to extreme dryness/humidity. Installation of a humidifier or dehumidifier may be necessary. The floor is designed to perform in an environmentally controlled structure.

A 25-Year Residential Finish Warranty:

Burlington warrants to the original purchaser, under normal residential traffic conditions and with proper maintenance that the pre-finished surface with Aluminum Oxide Finish will not peel off or wear through for 20 years from the date of purchase by the original purchaser. Gloss reduction is not covered under the finish warranty since it is not considered wear through. It is important to note that a floor exposed to sunrays (ultraviolet light) or to an intensive lighting may alter in a subtle way the color of the floor. This is a natural reaction for wood floors which cannot be recognized as a finish default. The warranty does not cover such fading of your floor. It is recommended periodically to move area rugs in order to minimize the effects of ultraviolet light on your hardwood floors. Warranty excludes any scratches, dents, notches and any damages to the finish caused by lack of proper maintenance, negligence, inappropriate use of floors, fire, burns, excessive heat, cold, indelible liquids, water, moisture, erosion, external environmental conditions, accident, natural disaster, stones, sand, other abrasives and corrosives material, insect infestation, animals and domestic pets, theft, vandalism, sharp or blunt edge objects, excessive impacts, spiked heel shoes, crib and rocking chair, casters, insufficient protection in kitchen and under furniture, wet mopping or failure to follow all the manufacturer's written maintenance instructions. Use of floor care products other than those recommended by Burlington flooring may damage your floor and may void the warranty.

Additional Warranty Disclaimers and Exclusions

In addition to all the above stated warranty disclaimers and exclusions, this warranty shall not apply to all of the following:

Water damage to the flooring caused by broken or leaking pipes; Damage to the flooring caused by flooding, hurricanes, other natural disasters, and Acts of God; Damage to the flooring caused by improper handling, shipping and storage; Installation of the flooring in an environment outside of the 35% to 55% relative humidity range; Installation of the flooring on a moist, damp, wet or leaking or otherwise unsuitable subfloor ; Improper alterations and maintenance of the original manufactured product; Failure to follow all the manufacturer's written installation and maintenance instructions; and no warranties shall apply to any product or products designated and sold as clearance or non-standard items. Any product or products so designated are sold "as is".

If in the unlikely event any portion of your floor should fail with respect to the provisions of these warranties, Burlington will replace (material only) such portion, at no cost to the original purchaser, with the same product or another product of equal value. To file a claim, first contact the authorized Burlington dealer where the original purchase was made. If the dealer is unable to satisfy the claim, please contact BuildDirect. Claims must also be filed within the warranty coverage period and receipt verifying date of purchase and the ownership of the products will be required. Burlington warranties are not transferable and the warranties are valid ONLY if the owner can provide an original proof of purchase. Burlington reserves the right to have a designated Burlington representative inspect the floors and remove samples for technical analysis. No distributor, installer, retailer, agent or employee of Burlington Hardwood Floors has the authority to alter the obligations or limitations of any Burlington warranty