Frequently Asked Questions - DriTac 7600

1. What type of adhesive is DriTac 7600?
2. What are the flooring types warranted with DriTac 7600?
3. What types of subfloors are recommended with DriTac 7600?
4. What are the trowel sizes for DriTac 7600 and the flooring types they are used for?
5. What are the accepted types of moisture tests recommended with DriTac 7600?
6. What are the acceptable levels of moisture for concrete when installing DriTac 7600?
7. What is the acceptable amount of variation in the subfloor when using DriTac 7600?
8. What type of leveling compound does DriTac recommend when installing DriTac 7600?
9. What is recommended flash time when using DriTac 7600?
10. Is it necessary to roll the wood flooring after installation?
11. Does the job site need to acclimate to live-in conditions before installing DriTac 7600?
12. What temperature and humidity are considered to be live-in conditions?
13. Is DriTac 7600 recommended for exterior use?
14. Can DriTac 7600 be installed over old cut-back type adhesives?
15. Can DriTac 7600 be used only for on grade installations?
16. Is DriTac 7600 V.O.C. compliant?
17. Is DriTac 7600 flammable?
18. Does DriTac 7600 have a strong or offensive odor?
19. How long after installation before the flooring can be walked on?
20. How do you clean wet DriTac 7600?  Dry DriTac 7600?

1. What type of adhesive is DriTac 7600?

DriTac 7600 is a high solids moisture-cure urethane adhesive.

Return to top of page

2. What are the flooring types warranteed by DriTac 7600?

Return to top of page

3. What types of subfloors are recommended for DriTac 7600?

Return to top of page

4. What are the trowel sizes for DriTac 7600 and the flooring types they are used for?

For engineered wood plank (3 and 5 ply.: 3/16” x  5/32” v notch,        50 square feet per gallon.

5/16” solid parquet, 5/16” to 3/8’ solid strip, ¼”  engineered plank, inlays: 1/8” x 1/8” square notch, 80 square feet per gallon.

¾” solid wood planks/shorts 4’ x 4’ plywood: 1/4” x ¼” x ¼” square notch, 35 square feet per gallon.

Greater than ½” engineered plank and ¾” parquet: ¼” x 1/8” square notch, 40 square feet per gallon.                                                         

Return to top of page

5. What are the accepted types of moisture tests recommended with DriTac 7600?

Return to top of page

6. What are the acceptable levels of moisture for concrete when installing DriTac 7600?

Return to top of page

7. What is the acceptable amount of variation in the subfloor when using DriTac 7600?

Return to top of page

8. What type of leveling compound does DriTac recommend when installing DriTac 7600?

Return to top of page

9. What is recommended flash time when using DriTac 7600?

Return to top of page

10. Is it necessary to roll the wood flooring after installation?

Return to top of page

11. Does the job site need to acclimate to live-in conditions before installing DriTac 7600?

Return to top of page

12. What temperature and humidity are considered to be live-in conditions?

Return to top of page

13. Is DriTac 7600 recommended for exterior use?

Return to top of page

14. Can DriTac 7600 be installed over old cut-back type adhesives?

Return to top of page

15. Can DriTac 7600 be used only for on grade installations?

Return to top of page

16.  Is DriTac 7600 V.O.C. compliant?

Return to top of page

17. Is DriTac 7600 flammable?

Return to top of page

18. Does DriTac 7600 have a strong or offensive odor?

Return to top of page

19. How long after installation before the flooring can be walked on?

Return to top of page

20. How do you clean wet DriTac 7600?  Dry DriTac 7600?